•   support@advanceinstitute.in
  • +91-920 530 8249

Auto Scan Tweaser

Our Blog post image goes here

Auto Scan Tweaser

The Quick Test tweezers gives users an easy way to sort and evaluate loose components and to perform on-board measurements and debugging. Surface mount devices are usually tiny and without wire leads, making it much more difficult to test and identify SMD than conventional components. Precise tips, made of non-magnetic steel, are able to pick and reliably contact even the smallest SMD components, or take measurements from the device already mounted on a board. The probe can also be used to test conventional components with wire leads too short to insert into the test terminals.

1. Measures AC/DC voltage, resistance, continunity & diode test
2. Auto Scanning Mode/Auto range
3. Testing pins gold plated to reduce resistance and prevent rust
4. Uses Lithium battery CR2032, included
5. Will automatically identify whether component is a resistor, capacitor or diode

Quick-Test Auto-Scanning Tweezers

Resistance Range: 300/3K/30K/300K/3m/30M Ohms | Resolution: 0.1 Ohms
Capacitance Range: 3/30/300/nF | 3uF/30uF/300uF/3mF/30mF | Resolution 1pF
Diode Check: Open Voltage: 2.8V | Testing Current: 2mA
Continuity Check: When resistance is less than 30 ohms the buzzer will be activated
Weight: 0.75 lb

Submit Query

Mobile No.

If you Have Any Enquiry Call Us Now: 9205308249